contact Us

HomeGalleryVideosprojects pageLinksContact

Duct-tape Guy

In 2007 we decided at the last moment to create a viewing room. The plan was to have an actor mixed in with a few maniquins to deliver a scare.

To fill the room we needed to create a few more mourners. These pics weren't taken with the intent to create a "How to" but I think

the idea comes accros just fine.

First you will need:

2 Rolls of duct tape. Any color will do although I was lucky to find some beige at the surplus store

Good Pair of siscors.

Old clothes, including shirt, socks, pajamma bottoms or pants and gloves (optional).

Second, choose a subject. dress them in the old clothes as this will be what the tape will stick to.

If your maniquin is to stand then your ready to begin. If the subject is to be sitting as ours were, it is best to have the subject

sit in the same chair, or somethin close to it. This way the angles in the arms and the bend in the knees will match the pose once completed.

Once the subject is in the old clothes you can begin to wrap them with duct tape. Start at the feet an work your way up. ducttapeguy1

once both legs and arms were covered, it was time to work on the body. The long strips on duct tape going from the crotch to the chest were meant as some support.

Notice how the cuffs on the shirt were left un-tapped. we needed a place to attach fake hands to with out taping them one. We used a simple "Zip-Tie" to keep each hand in place.

Don't he look happy?

ducttapeguy2

Now that the body is covered, we used some extra tape for support in the critical bent areas so it would keep it's shape longer once filled with foam.

 

ducttapeguy3

Once your happy with the coverage you can begin to carefully cut away the clothing from your subject.

ducttapeguy4

One thing we didn't do here which might have come in handy was to use a sharpie and mark the cut lines with some referance lines. This would have made it easier to line up therfore making sure the shape was retained.

Once the subject is removed, stuff the cavity with what ever you have handy. Old clothes, packing peanuts, newspaper. In this case I used pink bubble wrap used for packing. It was free to me and I was able to get more then I needed. Start at the feet and stuff the cavity while closing up the cut seam with more tape. Make sure to adjust the shape of the arms and legs before you go to far.

ducttapeguy5

With the cavity filled and closed up, we could now attach the head and arms. Both came from Ghost Ride Productions.

Here you can see the "zip-Ties" used to hold the hands.

ducttapeguy6

Slap some clothes on, some shoes or boots a wig or a hat and it's hard to tell how real looking he is. In the dark it's almost impossible to tell whos real and whos fake.

 

 

ducttapeguy7
   

More pics of this project can be seen at:

http://www.flickr.com/photos/40827225@N00/sets/72157602696777630/

 

Web Master: Robert Santos Robert@Mantoothmanor.com

Copyright 2008 Mantooth Manor All Rights Reserved